[argyllcms] RE: [argyllcms] Re: CCT of a Speedlight

  • From: 김철우(케레인) <kcw767@xxxxxxxxx>
  • To: <argyllcms@xxxxxxxxxxxxx>
  • Date: Sun, 11 Jul 2021 02:44:32 +0900

I apologize in advance that I may have misinterpreted some sentences because I 
am not a native.
 
If the floor is wood, it will yellow due to bouncing and the color temperature 
will go down.
 
Lighting is more reflective than you might think.
Some standard illuminants, such as 'Just', have the shape of a cube.
These products are closed on 5 sides of the cube and only 1 side is open.
However, it can change up to 500k depending on ambient lighting.
A difference of 500k in open space is common.
 
Of course, the 1/4 power Speedlite is overwhelmingly brighter than standard 
illuminants.
However, it should be remembered that 50cm and 130cm have a difference of 2.6 
in proportion, and the amount of light decreases sharply by that square.
 
For this reason,
When measuring lighting, if you cannot completely control the ambient light, 
you should measure it as close as possible.
Of course, as a prerequisite, it must be sufficiently diffused so that the 
shape of the light does not occur.
 
The Studio WITHCOLOUR provides the best solution and color management 
consulting to photographers, designers, and print shops, Anyone who cares about 
color.
Wep: https://www.withcolour.co.kr
Shop: https://smartstore.naver.com/withcolour

 
-----Original Message-----
From: "ternaryd"<ternaryd@xxxxxxxxx>
To: <argyllcms@xxxxxxxxxxxxx>;
Cc:
Sent: 2021-07-11 (일) 01:59:23 (GMT+09:00)
Subject: [argyllcms] Re: CCT of a Speedlight
 
On Sun, 11 Jul 2021 00:14:56 +0900
김철우(케레인) <kcw767@xxxxxxxxx> wrote:

[...] Since the color temperature decreases
as the distance increases, it is suspected
that the surrounding environment of the
questioner is red or yellow, or the color
temperature of the ceiling light is D50 or
D32.

Thanks for the reply.

I did consider reflections. But at a distance
as close as 50cm, a flash zoom of 200mm and 1/4
power, there is no geometry allowing for it,
neither the ceiling nor the floor. The ambient
light adapter of the i1 is completely flat. And
if it where from the wood floor the CCT should
represent a warmer color, not a cooler one.

The funny thing is, that the image looks OK in
darktable. If I select the white balance preset
"flash" in darktable, the setting yields a CCT
of 6715°K. Does this mean that the CCT of a
typical flash is actually that cool?  Why then
are there so many products saying their flash
light is 5600°K ±200°K?

Other related posts:

  • » [argyllcms] RE: [argyllcms] Re: CCT of a Speedlight - 케레인