Just use spec2cie utility with appropriate illumination and obsever. If You choose FWA compensation, I recommend use "-n" option to avoid mis-up with non-FWA compensated original measured spectrum and to save space: Your data will contain only CIE values. Mon, 14 Mar 2011 18:50:39 +0100 письмо от Jan-Peter Homann <homann@xxxxxxxxxxxxxxxxxx>: > Hello list, > I do need to make some tests for applying OBA / FWA compensation on > measuremnt-data. > (I have spectral measurements and I want to have L*a*b* CGATS / .ti3 > data with applied OBA / FWA compensation. > > Is it correct, that for argyllcms, I would need to calculate with > colprof a profile using the -f option and than use fakeread to create > the L*a*b* CGATS / .ti3 data ? > > Thanks and best regards > Jan-Peter > > -- > ---------- Please note the new adress -------------- > > homann colormanagement --------- fon +49 30 611 075 18 > Jan-Peter Homann ------------ mobile +49 171 54 70 358 > Cotheniusstr. 3 -------- http://www.colormanagement.de > 10407 Berlin -------- mailto:homann@xxxxxxxxxxxxxxxxxx