Hi all,
I'm new in this ML.
My name is Marco and I'm trying to calibrate my Lenovo Thinkpad W530
monitor.
My notebook have an integrated calibration instrument, here a short
description:
ml@nb-ml:~ $ lsusb
Bus 002 Device 003: ID 0765:5010 X-Rite, Inc.
[...]
I'm doing this on Ubuntu 14.10 and original ubuntu Argyll package. Here
output from command:
ml@nb-ml:~ $ dispcal
[...]
-d n[,m] Choose the display n from the following list
(default 1)
Optionally choose different display m for VideoLUT
access
1 = 'Screen 1, Output LVDS-1 at 1920, 101, width 1600, height 900'
2 = 'Screen 2, Output VGA-1 at 0, 0, width 1920, height 1080'
[...]
-c listno Set communication port from the following list
(default 1)
1 = 'usb:/bus0/dev3 (GretagMacbeth Huey)'
[...]
ml@nb-ml:~ $ dispcal -D2 -d1 -c1 test
Checking XRandR 1.2 VideoLUT access
Display 0 name = ':0.0'
Got EDID for display
Checking XRandR 1.2 VideoLUT access
Display 1 name = ':0.0'
Got EDID for display
usb_check_and_add: found known instrument VID 0x765, PID 0x5010
huey_init_coms: About to init coms
usb_open_port: open port 'usb:/bus0/dev3 (GretagMacbeth Huey)' succeeded
huey_init_coms: Lenovo version
huey_init_coms: inited coms OK
huey_init_inst: called
huey_check_unlock: called
huey_check_unlock: unknown model ''
init_inst returned 'Not expected instrument model' (Not a known Huey Model)
new_disprd failed because init_inst failed
dispcal: Error - new_disprd() failed with 'Instrument Access Failed'
I downloaded last version of Argyll (compiled) but I experienced same
problem:
ml@nb-ml:~/src/Argyll_V1.6.3_bin $ ./bin/dispcal
[...]
-d n[,m] Choose the display n from the following list
(default 1)
Optionally choose different display m for VideoLUT
access
1 = 'Screen 1, Output LVDS-1 at 1920, 101, width 1600, height 900'
2 = 'Screen 2, Output VGA-1 at 0, 0, width 1920, height 1080'
[...]
-c listno Set communication port from the following list
(default 1)
1 = '/dev/bus/usb/002/003 (GretagMacbeth Huey)'
ml@nb-ml:~/src/Argyll_V1.6.3_bin $ ./bin/dispcal -D2 -d1 -c1 test
Checking XRandR 1.2 VideoLUT access
Display 0 name = ':0.0'
Got EDID for display
Checking XRandR 1.2 VideoLUT access
Display 1 name = ':0.0'
Got EDID for display
usb_check_and_add: found instrument vid 0x0765, pid 0x5010
new_inst: called with path '/dev/bus/usb/002/003 (GretagMacbeth Huey)'
huey_init_coms: About to init coms
usb_open_port: open port '/dev/bus/usb/002/003' succeeded
huey_init_coms: Lenovo version
huey_init_coms: inited coms OK
huey_init_inst: called
huey_check_unlock: called
huey_check_unlock: unknown model 'ECCM2 '
init_inst returned 'Not expected instrument model' (Not a known Huey Model)
new_disprd failed because init_inst failed
urb_reaper: cleared requests
dispcal: Error - new_disprd() failed with 'Instrument Access Failed'
Does anyone can help me?
Thank you,
Marco
