[argyllcms] Re: Ugra/Forga Media Wedge CMYK V3.0a .ti2
- From: Graeme Gill <graeme@xxxxxxxxxxxxx>
- To: argyllcms@xxxxxxxxxxxxx
- Date: Thu, 12 Jan 2012 11:48:45 +1100
M. Kupiec wrote:
> I need to read with argyll Ugra/Forga Media Wedge CMYK V3.0a from orginal
> licenced strip to check if the printer is ok.
> I found .ti1 for UF 3.0 but after
>
> printtarg -v -ii1 -t300 -r -pA3 -L Fogra_V3 there is a problem with the
> corect order of the patches
Hi,
to read the strip you should just use the .ti2 file. Attached is a
.ti2 for the 3 row Fogra Strip #3, see how you go with that.
Graeme Gill.
CTI2
DESCRIPTOR "Argyll Calibration Target chart information 2"
ORIGINATOR "Manualy created for FOGRA strip #3 in 3 strip layout (E3Z)"
CREATED "Thu Jan 12 15:06:24 2011"
KEYWORD "TARGET_INSTRUMENT"
TARGET_INSTRUMENT "GretagMacbeth SpectroScan"
KEYWORD "APPROX_WHITE_POINT"
APPROX_WHITE_POINT "83.77 87.26 66.79"
KEYWORD "TOTAL_INK_LIMIT"
TOTAL_INK_LIMIT "270.0"
KEYWORD "COLOR_REP"
COLOR_REP "CMYK"
KEYWORD "STEPS_IN_PASS"
STEPS_IN_PASS "24"
KEYWORD "PASSES_IN_STRIPS"
PASSES_IN_STRIPS "3"
KEYWORD "SAMPLE_LOC"
NUMBER_OF_FIELDS 9
BEGIN_DATA_FORMAT
SAMPLE_ID SAMPLE_LOC CMYK_C CMYK_M CMYK_Y CMYK_K XYZ_X XYZ_Y XYZ_Z
END_DATA_FORMAT
NUMBER_OF_SETS 72
BEGIN_DATA
1 "A1" 100 0 0 0 14.91 22.41 53.72
2 "A2" 70 0 0 0 24.6 32.11 56.56
3 "A3" 40 0 0 0 41.86 48.84 63.97
4 "A4" 20 0 0 0 59.49 65.47 69.4
5 "A5" 10 0 0 0 71.85 76.74 72.45
6 "A6" 0 100 0 0 35.87 18.39 16.7
7 "A7" 0 70 0 0 42.6 27.5 24.95
8 "A8" 0 40 0 0 56.48 44.98 40.26
9 "A9" 0 20 0 0 69.77 63.34 55.08
10 "A10" 0 10 0 0 79.71 77.36 66.28
11 "A11" 0 0 100 0 74.36 78.79 7.06
12 "A12" 0 0 70 0 75.77 80.62 16.06
13 "A13" 0 0 40 0 78.94 83.73 32.04
14 "A14" 0 0 20 0 82.9 87.23 49.82
15 "A15" 0 0 10 0 85.2 88.98 61.85
16 "A16" 0 0 0 10 67.91 70.15 58.39
17 "A17" 0 0 0 20 49.47 51.05 42.55
18 "A18" 0 0 0 40 30.07 30.99 26.02
19 "A19" 0 0 0 60 15.9 16.31 13.78
20 "A20" 0 0 0 80 7.04 7.13 6.22
21 "A21" 0 0 0 100 1.69 1.61 1.67
22 "A22" 0 100 0 100 1.41 1.14 1.48
23 "A23" 0 70 70 60 9.68 7.17 3.38
24 "A24" 0 0 70 80 7.27 7.64 3.38
25 "B1" 100 100 0 0 4.35 2.81 13.31
26 "B2" 70 70 0 0 12.04 10.07 21.64
27 "B3" 40 40 0 0 28.32 26.36 35.63
28 "B4" 20 20 0 0 47.53 46.5 50.03
29 "B5" 10 10 0 0 64.23 64.56 61.64
30 "B6" 0 100 100 0 32.69 17.25 2.74
31 "B7" 0 70 70 0 39.4 25.83 7.73
32 "B8" 0 40 40 0 52.14 42.32 20.67
33 "B9" 0 20 20 0 66.2 60.84 38.79
34 "B10" 0 10 10 0 77.01 75.27 54.63
35 "B11" 100 0 100 0 6.66 16.31 5.63
36 "B12" 70 0 70 0 16.97 26.86 13.73
37 "B13" 40 0 40 0 35.31 44.25 29.06
38 "B14" 20 0 20 0 55.17 62.38 46.73
39 "B15" 10 0 10 0 69.88 75.46 59.92
40 "B16" 10 6 6 0 66.27 68.73 60.0
41 "B17" 20 12 12 0 48.71 50.74 45.17
42 "B18" 40 27 27 0 28.15 29.54 26.91
43 "B19" 60 45 45 0 15.65 16.58 15.62
44 "B20" 80 65 65 0 7.41 7.92 7.94
45 "B21" 100 85 85 0 3.11 3.51 4.29
46 "B22" 100 0 0 100 1.00 1.07 1.42
47 "B23" 20 100 70 60 6.34 3.91 2.68
48 "B24" 70 0 70 80 3.22 4.15 3.04
49 "C1" 100 100 100 0 2.42 2.16 2.69
50 "C2" 70 70 70 0 8.92 8.36 6.83
51 "C3" 40 40 40 0 24.72 24.12 18.8
52 "C4" 20 20 20 0 44.17 44.18 35.62
53 "C5" 10 10 10 0 61.84 62.76 51.51
54 "C6" 20 70 70 0 26.95 19.18 7.57
55 "C7" 40 70 70 20 13.71 10.9 5.89
56 "C8" 40 100 100 20 10.62 6.33 2.41
57 "C9" 40 100 40 20 11.7 6.77 7.24
58 "C10" 40 40 100 20 16.45 16.81 3.73
59 "C11" 100 40 100 20 3.62 6.84 3.5
60 "C12" 100 40 40 20 5.33 8.00 12.8
61 "C13" 100 100 40 20 2.75 2.07 6.41
62 "C14" 10 40 40 0 43.46 36.9 20.39
63 "C15" 0 40 100 0 49.78 40.72 4.88
64 "C16" 0 100 40 0 34.02 17.62 9.73
65 "C17" 40 100 0 0 16.66 9.11 14.75
66 "C18" 40 0 100 0 31.1 40.61 6.39
67 "C19" 100 0 40 0 9.99 19.02 25.24
68 "C20" 100 40 0 0 9.18 11.79 30.55
69 "C21" 0 0 0 0 87.38 90.38 75.45
70 "C22" 0 0 100 100 1.57 1.54 1.33
71 "C23" 0 70 0 60 10.61 7.67 7.74
72 "C24" 70 0 0 80 3.84 4.59 6.23
END_DATA
Other related posts:
