Hi! thanks for the Help!! : D This is what I get, which unlock code?? [macbeth@macbeth ~]$ spotread -D2 usb_check_and_add: found instrument vid 0x0765, pid 0x5020 i1d3_init_coms: called i1d3_init_coms: About to init USB usb_open_port: open port '/dev/bus/usb/008/003' succeeded i1d3_init_coms: suceeded i1d3_init_inst: called i1d3_unlock: called i1d3: Unknown lock code. Please contact ArgyllCMS for help Instrument initialisation failed with 'Communication protocol breakdown' (Don't know unlock code for device)! urb_reaper: cleared requests On Thu, Aug 1, 2013 at 7:01 PM, Graeme Gill <graeme@xxxxxxxxxxxxx> wrote: > Macbeth R. wrote: > > Hi, I'm having trouble accessing my HP device, wich I had read is the > same > > as X-Rite i1 DisplayPro, unless all my troubles are just because an OEM > > specific configuration. > > Hi, > sometimes OEM devices have their own access codes. > > > $ dispcal -yl -R > > dispcal: Error - new_disprd() failed with 'Instrument Access Failed' > > What do you get when your run "spotread -D2" ? > > Graeme Gill. > > -- CONFIDENTIALITY NOTICE: This e-mail message is intended only for the above-mentioned recipient(s). Its content is confidential. If you have received this e-mail by error, please notify us immediately and delete it without making a copy, nor disclosing its content, nor taking any action based thereon. Thank you.