Hello,
I have a problem that maybe someone has already met. I use a DMK 23G445
based camera (The Imaging Source) with a GigE interface. My goal is to take
snapshot pictures from a Raspberry Pi under Linux Raspian Jessie. I have
compiled aravis without problems, I can see the camera and take pictures
using the aravis library. However, for a reason I do not understand, the
images I get are corrupted (for a short period of time following the
install the images were correct then it did not work anymore). It seems I
lose packets and I get black strips on the image. Here is an example of
what I get (I use the camera to monitor the sky in an observatory --
obviously it was rainy this morning...):
https://dl.dropboxusercontent.com/u/52088867/image_from_aravis.jpg
I have tried many different things with the aravis settings without
success. I suspected the Raspberry Pi 2 Model B does not have a fast enough
Ethernet connectivity so I tried with a Banana Pi which has a GigE Ethernet
port, but I get the same result.
So any advice or experience on a similar problem is welcome!
Thanks and regards,
Philippe (France)
