Kevin, I'm curious about the bobbin suggestion you gave to Frank. Can I use bobbins that I wind with my sewing machine? Not something I would do very often but like to have options if needed. Thanks! Wendy Itchin' To Stitch MN >From: "Kevin A. Wasik" <kwasik@xxxxxxxxx> >Reply-To: amayausers@xxxxxxxxxxxxxxxx To: amayausers@xxxxxxxxxxxxxxxx >Subject: Re: [amayausers] micro times >Date: Thu, 15 Apr 2004 21:17:02 -0700 > >Hey Frank, > >Well another suggestion is to wind up an old bobbin with red thread. >My family used to do this but, we wound our bobbins back when I was in >production. >We had a bobbin winder. You could try winding it yourself. If you do not >have >a bobbin winder not sure how it will work but, you could give it a shot. >Kevin. >Melco Field Tech. > > >frank davis wrote: > >>Red >>Frank >>----- Original Message ----- From: "Kevin A. Wasik" <kwasik@xxxxxxxxx> >>To: <amayausers@xxxxxxxxxxxxxxxx> >>Sent: Thursday, April 15, 2004 9:43 PM >>Subject: Re: [amayausers] micro times >> >> >> >> >>>Question what color thread are you using? >>>Kevin. >>> >>>frank davis wrote: >>> >>> >>> >>>>Sorry, already tried that. This micro times has been a problem for me >>>> >>>> >>for >> >> >>>>since I started trying to use it almost two years ago. >>>>Thanks again, you all have jogged my memory on some things I had >>>> >>>> >>forgotten. >> >> >>>>Frank >>>>----- Original Message ----- From: "Kevin A. Wasik" <kwasik@xxxxxxxxx> >>>>To: <amayausers@xxxxxxxxxxxxxxxx> >>>>Sent: Thursday, April 15, 2004 9:13 PM >>>>Subject: Re: [amayausers] micro times >>>> >>>> >>>> >>>> >>>> >>>> >>>>>Hey Frank >>>>> >>>>>Note: you can tighten the bobbin little more it should be fine for >>>>>the runs you are doing. Then you can reset the bobbin back to Amaya >>>>> >>>>> >>specs. >> >> >>>>>Kevin Wasik. >>>>>Melco Field Tech. >>>>> >>>>> >>>>>frank davis wrote: >>>>> >>>>> >>>>> >>>>> >>>>> >>>>>>Thanks Kevin. I tried 40 and 30. It did help, but I still have a few >>>>>>bobbin threads showing. I'll keep playing. >>>>>>Frank >>>>>>----- Original Message ----- From: "Kevin A. Wasik" <kwasik@xxxxxxxxx> >>>>>>To: <amayausers@xxxxxxxxxxxxxxxx> >>>>>>Sent: Wednesday, April 14, 2004 11:07 PM >>>>>>Subject: Re: [amayausers] micro times >>>>>> >>>>>> >>>>>> >>>>>> >>>>>> >>>>>> >>>>>> >>>>>> >>>>>>>40 works good. Don't forget to reset it back to 50 after you are >>>>>>>done. >>>>>>>Kevin Wasik. >>>>>>>Melco Field Tech. >>>>>>> >>>>>>> >>>>>>>frank davis wrote: >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>>>No, that's one I haven't tried. Actually I forgot about it. I'll >>>>>>>> >>>>>>>> >>give >> >> >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>it a >>>>>> >>>>>> >>>>>> >>>>>> >>>>>> >>>>>> >>>>>>>>shot. Thanks Janel. >>>>>>>>Frank >>>>>>>>----- Original Message ----- From: "Janel Harris" >>>>>>>><janel@xxxxxxxxxxxxxx> >>>>>>>>To: <amayausers@xxxxxxxxxxxxxxxx> >>>>>>>>Sent: Wednesday, April 14, 2004 9:22 PM >>>>>>>>Subject: RE: [amayausers] micro times >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>>>Frank, >>>>>>>>> >>>>>>>>>Have you tried lowering the column feed? >>>>>>>>> >>>>>>>>>Janel Harris >>>>>>>>>Dimensional Designs >>>>>>>>>http://www.dimdesigns.com >>>>>>>>>Contract Digitizer >>>>>>>>>Melco On-Site Trainer >>>>>>>>> >>>>>>>>> >>>>>>>>>-----Original Message----- >>>>>>>>>From: frank davis [mailto:fadavis@xxxxxxxxxxxx] >>>>>>>>>Sent: Wednesday, April 14, 2004 5:45 PM >>>>>>>>>To: Amayausers@xxxxxxxxxxxxxxxx >>>>>>>>>Subject: [amayausers] micro times >>>>>>>>> >>>>>>>>>Does anyone but me have trouble with micro times. >>>>>>>>>I'm using a 70/10 sharp needle on poplin. The lettering is .26'' >>>>>>>>> >>>>>>>>> >>and >> >> >>>>>>>>>set to specs. Lettering looks good except for the white bobbin >>>>>>>>> >>>>>>>>> >>thread >> >> >>>>>>>>>that gets pulled up through several times per letter. I've tried >>>>>>>>>everything I can think of; material thickness, bobbin tension >>>>>>>>>speed, >>>>>>>>>pull comp, ect. Does anyone else have this problem? Just >>>>>>>>>wondered >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>if >>>> >>>> >>>> >>>> >>>>>>>>>someone can suggest something I'm missing. The bobbin thread in >>>>>>>>>red >>>>>>>>>lettering doesn't look that great. >>>>>>>>>Thanks, >>>>>>>>>Frank >>>>>>>>>Force Ten >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>--------------------------------------------------------------------- >>>>>>>> >>>>>>>> >>>>>>>>>To unsubscribe, e-mail: amayausers-unsubscribe@xxxxxxxxxxxxxxxx >>>>>>>>>For additional commands, e-mail: amayausers-help@xxxxxxxxxxxxxxxx >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>--------------------------------------------------------------------- >>>>>>>>To unsubscribe, e-mail: amayausers-unsubscribe@xxxxxxxxxxxxxxxx >>>>>>>>For additional commands, e-mail: amayausers-help@xxxxxxxxxxxxxxxx >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>--------------------------------------------------------------------- >>>>>>>To unsubscribe, e-mail: amayausers-unsubscribe@xxxxxxxxxxxxxxxx >>>>>>>For additional commands, e-mail: amayausers-help@xxxxxxxxxxxxxxxx >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>--------------------------------------------------------------------- >>>>>>To unsubscribe, e-mail: amayausers-unsubscribe@xxxxxxxxxxxxxxxx >>>>>>For additional commands, e-mail: amayausers-help@xxxxxxxxxxxxxxxx >>>>>> >>>>>> >>>>>> >>>>>> >>>>>> >>>>>> >>>>>> >>>>>> >>>> >>>>--------------------------------------------------------------------- >>>>To unsubscribe, e-mail: amayausers-unsubscribe@xxxxxxxxxxxxxxxx >>>>For additional commands, e-mail: amayausers-help@xxxxxxxxxxxxxxxx >>>> >>>> >>>> >>>> >>>> >>>> >>>--------------------------------------------------------------------- >>>To unsubscribe, e-mail: amayausers-unsubscribe@xxxxxxxxxxxxxxxx >>>For additional commands, e-mail: amayausers-help@xxxxxxxxxxxxxxxx >>> >>> >>> >> >> >> >>--------------------------------------------------------------------- >>To unsubscribe, e-mail: amayausers-unsubscribe@xxxxxxxxxxxxxxxx >>For additional commands, e-mail: amayausers-help@xxxxxxxxxxxxxxxx >> >> >> >> > > >--------------------------------------------------------------------- >To unsubscribe, e-mail: amayausers-unsubscribe@xxxxxxxxxxxxxxxx >For additional commands, e-mail: amayausers-help@xxxxxxxxxxxxxxxx > _________________________________________________________________ Watch LIVE baseball games on your computer with MLB.TV, included with MSN Premium! http://join.msn.com/?page=features/mlb&pgmarket=en-us/go/onm00200439ave/direct/01/ --------------------------------------------------------------------- To unsubscribe, e-mail: amayausers-unsubscribe@xxxxxxxxxxxxxxxx For additional commands, e-mail: amayausers-help@xxxxxxxxxxxxxxxx