This message was posted by Rod or Sharon on AmayaUsers.com. PLEASE DO NOT REPLY VIA EMAIL. Instead, respond to the thread on the WEBSITE by clicking here: http://www.amayausers.com/boards/ultimatebb.php?/topic/1/97.html#000002 You could also try taping standard backing to the fast frame and not use the sticky backing at all. You will have to use some type of "low profile" clamps to clip on the sides of the fast frame after slipping the pant leg on it to hold the material in place. This works very well. You do need low profile clamps or clips so they don't come in contact with the grabber or any part of the machine during a trace or while sewing, some people use the stationary binder clips and flip the spring wire flat on the garment and/or small alligator style clips found at places like Home Depot. Using too big of a clamp and allowing it to contact the needle case and/or the grabber assembly that is connected to the needle case during atrace and/or sewing, can result in knocking the needle case loose and dropped needle bars----tech call time....so be careful using this method!! Rod Springer =========================================================== The AmayaUsers Mailing List Website: http://www.amayausers.com Discussion Board: http://www.amayausers.com/boards Subscribe/Unsubscribe: http://www.amayausers.com/list ===========================================================