[amayausers.com] Re: residue from fusible mesh backing
- From: theboards@xxxxxxxxxxxxxx
- To: amayausers@xxxxxxxxxxxxx
- Date: Mon, 1 Aug 2011 20:50:17 UT
This message was posted by Greenwing on AmayaUsers.com. PLEASE DO NOT REPLY VIA
EMAIL. Instead, respond to the thread on the WEBSITE by clicking here:
http://www.amayausers.com/boards/cgi-bin/ultimatebb.cgi?/topic/2/1499.html#000004
It will never wash out.
The adhesive is there to stay.
You can disperse it by reheating and you can reduce it by tranfering it to a
pressing cloth like a paper towel.
the bestthing to do is NOT heat it so much that it over melts.
I use them all the time and I have marked the setting on my Iorn and Heat Press
both were the backing just pulls away cleanly.
Now I dont even think about it any longer, it is second nature.
===========================================================
The AmayaUsers Mailing List
Website: http://www.amayausers.com
Discussion Board: http://www.amayausers.com/boards
Subscribe/Unsubscribe: http://www.amayausers.com/list
===========================================================
Other related posts:
