[amayausers] looking for hats
- From: "David Lindsey <Vector Shirts>" <david@xxxxxxxxxxxxxxxx>
- To: <amayausers@xxxxxxxxxxxxx>
- Date: Fri, 8 Jul 2005 13:43:22 -0400
I saw a supplier one time that had licensed Chevrolet hats with like the bowtie
on the side that you could embroider the front. Has anybody seem this or am I
just going crazy (don't answer that please). Sometimes you imagine things that
you want. Old age.
Hope everyone had a happy Fourth.
Thanks for the help.
David
David Lindsey
Vector Shirts
Hamlet, NC
----- Original Message -----
From: E. Orantes
To: amayausers@xxxxxxxxxxxxx
Sent: Wednesday, July 06, 2005 2:04 PM
Subject: [amayausers] Re: Thread feeder roller problem
Yeah,... well, I believe what you say but I wonder if they meant when you
install the new roller to "gently press on the thread feed gear" as you roll it
into position? That's my guess. If you want to spin the roller in place, the
only quick way to do this is to hit the "Laser pointer" button and the "arrow
up" button at the same time. This is what I used to call the "200 point thread
spit." I say this because we were taught that it was an automatic way to get
200 pts of thread advanced on the active needle. I measured it recently and
it's way more that 200 points. Maybe I was measuring wrong or maybe I heard
wrong in class. There are 254 points in an inch and you get about 3 and a half
inches of thread. Go figure.
Oh well, doesn't really matter anyway because it's not really a practical
feature for us. When we need extra thread, we lift the red roller, pull out an
arms length of thread, and lower the roller back down. I've heard there was a
theory that there were people out there who were not lifting the red roller
high enough when pulling on the thread and as a result were cutting grooves in
the thread feed roller. I think that's hogwash as you've got to be a real
accurate bozo to not lift the red roller high enough when pulling out extra
thread for thread breaks.
How's everyone doing with thread breaks? I haven't heard a great deal
about thread breaks in a long time. Could they be a thing of the past??? Yeah
right! To many factors, so little time.
Ed
-----Original Message-----
From: amayausers-bounce@xxxxxxxxxxxxx
[mailto:amayausers-bounce@xxxxxxxxxxxxx]On Behalf Of Lee or Terri Hoover
Sent: Wednesday, July 06, 2005 11:28 AM
To: amayausers@xxxxxxxxxxxxx
Subject: [amayausers] Re: Thread feeder roller problem
Hi Ed,
It makes sense what you are saying. I always take the rollers out for
inspection. In the Amaya Operators manual (also in the help and maintenance
windows) page 7-14, it tells you to "carefully rotate the roller" by pressing
"gently on the thread feeder gear".
Terri
Other related posts: