[amayausers] Re: large lettering
- From: "Lee or Terri Hoover" <lhoover2@xxxxxxxxxxxxxxxx>
- To: <amayausers@xxxxxxxxxxxxx>
- Date: Fri, 3 Mar 2006 15:57:30 -0600
I'm confused.... for doing the large lettering changing it from satin to
fill should the number of partitions be 8 or 2? What do you do with the
partition sequence?
Thanks
Terri
Embroidery Creations
-----Original Message-----
From: amayausers-bounce@xxxxxxxxxxxxx
[mailto:amayausers-bounce@xxxxxxxxxxxxx] On Behalf Of Roland R. Irish III
Sent: Friday, March 03, 2006 3:24 PM
To: amayausers@xxxxxxxxxxxxx
Subject: [amayausers] Re: large lettering
> That sounds about right...I just kept lowering the partition count
> until I got a decent 2 or 3 column fill for the letters. This was
> for the back of Sanmar work jackets-stiff and thick enough no worry
> about puckering!
Roland
> You must have done it in Fill w/ partitions that look like split
> column. I
> can't find anywhere in my software where you can change partitions
> for satin
> stitches. If you change fills to 8 partitions it looks similar to
> split
> columns. You would have to go to fill to do letters that big but
> its just so
> many stitches and you have to worry about puckering.
>
> Aaron Sargent
> T
Other related posts:
