This message was posted by levelbest on AmayaUsers.com. PLEASE DO NOT REPLY VIA EMAIL. Instead, respond to the thread on the WEBSITE by clicking here: http://www.amayausers.com/boards/ultimatebb.php?/topic/1/203.html#000001 Hopefully another tech can step it. Could just be that it's saturday night but I couldn't come up with the solution. He's stuck between needles one and two. The presser foot and the needle are not moving together so things are not lined up. Tried making sure the repricator rod was lined up with needle case studs with the estop on and moving the needle case left or right to line up the needle with the presser foot, but it wouldn't budge for him. Good thing is that no needles are dropped so, if we can get the needlecase ligned up properly, we should be good to go. BTW, we also blew out the color change sensor. If anyone can lend a hand, today or tomorrow, please do. =========================================================== The AmayaUsers Mailing List Website: http://www.amayausers.com Discussion Board: http://www.amayausers.com/boards Subscribe/Unsubscribe: http://www.amayausers.com/list ===========================================================