[amayausers.com] Re: cutting stabilizer
- From: theboards@xxxxxxxxxxxxxx
- To: amayausers@xxxxxxxxxxxxx
- Date: Mon, 11 Mar 2013 14:19:35 UT
This message was posted by Rod or Sharon on AmayaUsers.com. PLEASE DO NOT REPLY
VIA EMAIL. Instead, respond to the thread on the WEBSITE by clicking here:
http://www.amayausers.com/boards/cgi-bin/ultimatebb.cgi?/topic/2/1683.html#000001
Take hold of the stabilizer on one edge and let the garment "hang" loose. For
left chest designs, we usually just pull the stabilizer and design area up
through the neck hole. This way you will be able to see the backside of the
stabilizer next to the garment. Now while letting it hang free you can cut a
nice clean edge around the outside of the logo/design and not have to worry
about cutting the garment....works great.
Rod Springer
Amaya Tech & Trainer
===========================================================
The AmayaUsers Mailing List
Website: http://www.amayausers.com
Discussion Board: http://www.amayausers.com/boards
Subscribe/Unsubscribe: http://www.amayausers.com/list
===========================================================
Other related posts:
