This message was posted by Juli in Kona on AmayaUsers.com. PLEASE DO NOT REPLY VIA EMAIL. Instead, respond to the thread on the WEBSITE by clicking here: http://www.amayausers.com/boards/ultimatebb.php?/topic/2/1111.html#000001 Make your shape. Properties/effects/ Custom density and set the densities to something like .7 and 2.5. The default of 0 will not do at all! It is as easy as that. You need to go in and change the colors. It seems about the same as earlier versions. I am using V 9.00.099. On some earlier versions when you sent it to the machine, the colors were all screwed up. I haven't sewn this out so don't know how it works in this version. I would definitely do a sample sewout before I did it for real. And when you do that, make more than one - make 2 or 3 small ones and then carefully set your colors for the sewout. Juli in Kona =========================================================== The AmayaUsers Mailing List Website: http://www.amayausers.com Discussion Board: http://www.amayausers.com/boards Subscribe/Unsubscribe: http://www.amayausers.com/list ===========================================================