Susan, I believe if you open your column properties then change the parameters desired (auto density, min column width, whatever) then select "save as default" you will be in good shape. Be aware that anything listed there (underlay, split columns, etc) that are enabled will also become the default parameters. Herb ----- Original Message ----- From: "Susan Davidson" <Sewfly@xxxxxxx> To: <amayausers@xxxxxxxxxxxxx> Sent: Tuesday, March 06, 2007 1:45 PM Subject: [amayausers] auto density question for Herb > Herb, > > A year or so ago, you posted auto density settings that you use. Is there > someway to permanently set these so I don't have to re-enter every time > that > I open the program? > > TIA, > > Susan > =========================================================== > > The AmayaUsers Mailing List > Website: http://www.amayausers.com > Discussion Board: http://www.amayausers.com/boards > Subscribe/Unsubscribe: http://www.amayausers.com/list > > =========================================================== > > > -- > No virus found in this incoming message. > Checked by AVG Free Edition. > Version: 7.5.446 / Virus Database: 268.18.7/711 - Release Date: 3/5/2007 > 9:41 AM > > =========================================================== The AmayaUsers Mailing List Website: http://www.amayausers.com Discussion Board: http://www.amayausers.com/boards Subscribe/Unsubscribe: http://www.amayausers.com/list ===========================================================