[amayausers.com] Re: XT not cutting bobbin thread
- From: theboards@xxxxxxxxxxxxxx
- To: amayausers@xxxxxxxxxxxxx
- Date: Sun, 4 Jan 2009 01:38:41 UT
This message was posted by Wishes on AmayaUsers.com. PLEASE DO NOT REPLY VIA
EMAIL. Instead, respond to the thread on the WEBSITE by clicking here:
http://www.amayausers.com/boards/ultimatebb.php?/topic/1/588.html
We have an XT that is about three years old. It has this moment after about 8
designs that it chooses not to cut the bobbin thread. It cuts all theads
during the design sewout but on the last thread cut it fails to cut the bobbin
thread. As you pull it out a trail of thread follows you. Each time we take
off the needleplate, clean everything, send out the knife and the selector,
blow things out, check for anything amiss and nothing. Put it back together
and it works for about 8-10 designs and it happens all over again. This same
machine also fails to catch the bobbin thread often. We do all the
maintaintence and follow all the procedures. Is it possible that these two
things are related or am I dealing with two different problems? Any suggestions?
Margaret
===========================================================
The AmayaUsers Mailing List
Website: http://www.amayausers.com
Discussion Board: http://www.amayausers.com/boards
Subscribe/Unsubscribe: http://www.amayausers.com/list
===========================================================
Other related posts:
