[amayausers.com] Re: X Motor Tracking Error
- From: webmaster@xxxxxxxxxxxxxx
- To: amayausers@xxxxxxxxxxxxx
- Date: Sat, 19 Jul 2008 18:09:13 UT
This message was posted by HERB on AmayaUsers.com. PLEASE DO NOT REPLY VIA
EMAIL. Instead, respond to the thread on the WEBSITE by clicking here:
http://www.amayausers.com/boards/ultimatebb.php?/topic/1/461.html#000004
This error message can also be caused by trying to sew a very long satin stitch
on caps. The same stitch can be sewn using a flat hoop without issue. Am not
sure what software version I was using at the time. Had to tell the machine it
was sewing a 15cm hoop whan in fact the cap driver was installed. NOT a
recommended procuedure!
Engage E-Stop and release, should clear the message.
===========================================================
The AmayaUsers Mailing List
Website: http://www.amayausers.com
Discussion Board: http://www.amayausers.com/boards
Subscribe/Unsubscribe: http://www.amayausers.com/list
===========================================================
Other related posts:
