This message was posted by THREADS on AmayaUsers.com. PLEASE DO NOT REPLY VIA EMAIL. Instead, respond to the thread on the WEBSITE by clicking here: http://www.amayausers.com/boards/ultimatebb.php?/topic/8/73.html Having a problem with one of my XT's not trimming the thread. It is real bad with caps..not trimming at all. With Flats it's not trimming over 50% OF THE TIME. Went into maintenence and did the trim test, so the mechanism is working. Changed the blade..... Checked and re-checked the Bobbin tension..... Machine is only 4 months old and is under warranty, BUT AFTER 90 DAYS MELCO SLAMS YOU For travel expenses. THAT"S NOT A WARRANTY IN MY BOOK! Any ideas from you veterens out there on what this problem might be? I sure would like to save the $200+ extortion fee for the Tech to travel here to fix this thing. Thanks in advance for any advice...... Mike@ TOUCAN Embroidery =========================================================== The AmayaUsers Mailing List Website: http://www.amayausers.com Discussion Board: http://www.amayausers.com/boards Subscribe/Unsubscribe: http://www.amayausers.com/list ===========================================================