This message was posted by KERRMINATOR on AmayaUsers.com. PLEASE DO NOT REPLY VIA EMAIL. Instead, respond to the thread on the WEBSITE by clicking here: http://www.amayausers.com/boards/ultimatebb.php?/topic/1/825.html Sorry for using the term "thing" but I don't know what the deuce it's actually called. We have noticed since we got our machine, that when we do the 4,000,000 stitch maintenance and remove the needle plate, there is a ton of thread wrapped around the rod thing behind the bobbin case thing....not actually in where the bobbin case sits, but behind the part where the bobbin case goes in. :eek: Is this something we have to just check constantly or is there something off with our machine? If you have any idea what I'm referring to I'd appreciate some advice because this has been happening since we got the machine (we've had it less than a year). =========================================================== The AmayaUsers Mailing List Website: http://www.amayausers.com Discussion Board: http://www.amayausers.com/boards Subscribe/Unsubscribe: http://www.amayausers.com/list ===========================================================