[amayausers.com] Re: Thread springs out of needle
- From: "Mary\(Shuffletown Embroidery\)" <mary@xxxxxxxxxxxxxxxxxxxxxxxxx>
- To: <amayausers@xxxxxxxxxxxxx>
- Date: Tue, 8 Dec 2009 19:53:52 -0500
Check the presser foot height. It may be too low. Could that have changed
since it was sewing OK?
Mary Buckle
Shuffletown Embroidery
Charlotte, NC 28214
704-398-1273
From: amayausers-bounce@xxxxxxxxxxxxx
[mailto:amayausers-bounce@xxxxxxxxxxxxx] On Behalf Of Darlene Weber
Sent: Tuesday, December 08, 2009 7:49 PM
To: Amaya
Subject: [amayausers.com] Thread springs out of needle
Can anyone tell me what is wrong on my XT when it trims and the threads
springs because it is tight and pulls out of the needles? It does it on all
needles, I have changed bobbin cases and checked them, checked material
thickness, etc and whatever else I need to do naturally and it still does
it. It sewed good all day on the same design and just started this with the
last 5 garments. PLEASE help me!
Thanks!@
Other related posts:
