[amayausers.com] Re: Thread coming out of needle during sew out
- From: theboards@xxxxxxxxxxxxxx
- To: amayausers@xxxxxxxxxxxxx
- Date: Thu, 21 Oct 2010 09:11:28 UT
This message was posted by gcannon on AmayaUsers.com. PLEASE DO NOT REPLY VIA
EMAIL. Instead, respond to the thread on the WEBSITE by clicking here:
http://www.amayausers.com/boards/cgi-bin/ultimatebb.cgi?/topic/1/1022.html#000008
Yes, the only way to increase bobbin tension is to turn the screw on the bobbin
case; just keep in mind if you increase the bobbin tension too much, it will
affect acti-feed & could cause other problems- such as puckering, especially on
knit fabrics.
===========================================================
The AmayaUsers Mailing List
Website: http://www.amayausers.com
Discussion Board: http://www.amayausers.com/boards
Subscribe/Unsubscribe: http://www.amayausers.com/list
===========================================================
Other related posts:
