[amayausers.com] Re: Thead tension.
- From: webmaster@xxxxxxxxxxxxxx
- To: amayausers@xxxxxxxxxxxxx
- Date: Wed, 28 Nov 2007 14:00:18 UT
This message was posted by The Embroidery Authority on AmayaUsers.com. PLEASE
DO NOT REPLY VIA EMAIL. Instead, respond to the thread on the WEBSITE by
clicking here:
http://www.amayausers.com/boards/ultimatebb.php?/topic/1/267.html#000001
Margaret,
Change your bobbin spool or bobbin case or both. Sounds like your bobbin
tension is not consistent. I'll bet you're using those good ole fashion
cardboard sided bobbins. On average, 5 percent of the box of cardboard sided
bobbins can give you problems. Don't always expect 100% of the box to be
usable. In training we discuss this and why.
Also, make sure the bobbin thread is inserted into the bobbin case the correct
way. The bobbin thread should come off the bobbin spool in a clockwise
direction when inserting the spool into the back of the bobbin case.
Good Luck,
Ed Orantes
Melco Tech & Trainer
===========================================================
The AmayaUsers Mailing List
Website: http://www.amayausers.com
Discussion Board: http://www.amayausers.com/boards
Subscribe/Unsubscribe: http://www.amayausers.com/list
===========================================================
Other related posts:
