[amayausers.com] Re: Smoke Damage?
- From: theboards@xxxxxxxxxxxxxx
- To: amayausers@xxxxxxxxxxxxx
- Date: Sat, 30 Jan 2010 21:22:25 UT
This message was posted by Ted II on AmayaUsers.com. PLEASE DO NOT REPLY VIA
EMAIL. Instead, respond to the thread on the WEBSITE by clicking here:
http://www.amayausers.com/boards/ultimatebb.php?/topic/1/862.html#000005
Donald;
Ted here, 3rd party tech in MO. You've had good advice on everything but the
machine. I'd be concerned about the boards the Y rails and X rollers. You can
clean most anything on the machine. I don't knopw about cleaning the boards but
the X rollers and the Y bearings could be replaced. Certainly a good
lubrication on all points. I'd want to talk to MELCO about it and they will
want to know about how much smoke you had. Where in OK are you?
===========================================================
The AmayaUsers Mailing List
Website: http://www.amayausers.com
Discussion Board: http://www.amayausers.com/boards
Subscribe/Unsubscribe: http://www.amayausers.com/list
===========================================================
Other related posts:
