This message was posted by Rod or Sharon on AmayaUsers.com. PLEASE DO NOT REPLY VIA EMAIL. Instead, respond to the thread on the WEBSITE by clicking here: http://www.amayausers.com/boards/cgi-bin/ultimatebb.cgi?/topic/1/1468.html#000002 To add to what Mamma Kass mentioned.....take off the rubber dust caps off of the pantograph ends, you will see the metal rods Mamma is talking about, depress the E-stop or have the machine turned off, push or pull the X axis carriage to either the far left or far right. Dab "multi-purpose" grease on the metal rods and then move the X axis carriage to the other side and repeat the dabbing process. Be careful on the "left" side of the pantograph as there is a laser in the center area of the top portion of the pantograph and it does not like any grease or debris to coat its surface or it will not allow the X axis to center properly.... Rod Springer Amaya Tech & Trainer =========================================================== The AmayaUsers Mailing List Website: http://www.amayausers.com Discussion Board: http://www.amayausers.com/boards Subscribe/Unsubscribe: http://www.amayausers.com/list ===========================================================