[amayausers] Re: RA Essene Thread
- From: webmaster@xxxxxxxxxxxxxx
- To: amayausers@xxxxxxxxxxxxx
- Date: Tue, 31 Oct 2006 19:51:45 UT
This message was posted by Steve on AmayaUsers.com. PLEASE DO NOT REPLY VIA
EMAIL. Instead, respond to the thread on the WEBSITE by clicking here:
http://www.amayausers.com/boards/ultimatebb.php?/topic/2/34.html#000002
If you are using a commercial embroidery machine, always make sure you are
using thread designed for high speed machines. (Ackermann, Maderia, ARC, etc.)
The thread that you buy at the store is usually designed for home sewing
machines that sew at 150-200 stitches per minute. Store purchased thread will
break within 15 seconds everytime. It just can't handle the speed and friction
that commercial machines do at high speeds running at 1000+ stitches per
minute. The 3 brands I mentioned above are probably the best ones as far as
minimizing thread breaks.
===========================================================
The AmayaUsers Mailing List
Website: http://www.amayausers.com
Discussion Board: http://www.amayausers.com/boards
Subscribe/Unsubscribe: http://www.amayausers.com/list
===========================================================
Other related posts:
