LuAnn, I have a Dakota design of a Packard with the top up. #WH0231 It is looking at front and driver's side 3.02W X 1.63 H. Could you use it? e-mail me if you need to see the design. JO Jo@xxxxxxxxxxxxxxxx Just Sew It Custom Embroidery 14893 Deer Run Rd Delta, Colorado 81416 970-874-7899 --- On Thu, 9/11/08, webmaster@xxxxxxxxxxxxxx <webmaster@xxxxxxxxxxxxxx> wrote: From: webmaster@xxxxxxxxxxxxxx <webmaster@xxxxxxxxxxxxxx> Subject: [amayausers.com] Re: Packard design needed To: amayausers@xxxxxxxxxxxxx Date: Thursday, September 11, 2008, 7:46 AM This message was posted by Image Embroidery on AmayaUsers.com. PLEASE DO NOT REPLY VIA EMAIL. Instead, respond to the thread on the WEBSITE by clicking here: http://www.amayausers.com/boards/ultimatebb.php?/topic/4/411.html I know there is a site that has several auto designs, but cannot think of it. Does anyone have a source for auto designs. I need a Packard body style around 1930ish, convertable, but with the top up. Any help would be so greatly appreciated. Thanks, LuAnn :) =========================================================== The AmayaUsers Mailing List Website: http://www.amayausers.com Discussion Board: http://www.amayausers.com/boards Subscribe/Unsubscribe: http://www.amayausers.com/list ===========================================================