[amayausers.com] Re: Outline Text on Visors
- From: theboards@xxxxxxxxxxxxxx
- To: amayausers@xxxxxxxxxxxxx
- Date: Thu, 29 Apr 2010 03:01:36 UT
This message was posted by Juli in Kona on AmayaUsers.com. PLEASE DO NOT REPLY
VIA EMAIL. Instead, respond to the thread on the WEBSITE by clicking here:
http://www.amayausers.com/boards/cgi-bin/ultimatebb.cgi?/topic/2/1236.html#000012
It helps to digitize a tack down stitch for the puffy foam. Right up the
center is fine, but rather long stitches. This is to be done first just after
you lay the foam down. That way it stays where it is supposed to. And the
density need to be awfully heavy - about .2 or so. And, of course, the foam is
the last thing done. So if there is an outline for the foam parts, they go
down first and then the foam on top.
===========================================================
The AmayaUsers Mailing List
Website: http://www.amayausers.com
Discussion Board: http://www.amayausers.com/boards
Subscribe/Unsubscribe: http://www.amayausers.com/list
===========================================================
Other related posts:
