[amayausers.com] Re: No backing stiches from bobbin
- From: theboards@xxxxxxxxxxxxxx
- To: amayausers@xxxxxxxxxxxxx
- Date: Mon, 17 Aug 2009 02:28:24 UT
This message was posted by TheresaJane on AmayaUsers.com. PLEASE DO NOT REPLY
VIA EMAIL. Instead, respond to the thread on the WEBSITE by clicking here:
http://www.amayausers.com/boards/ultimatebb.php?/topic/1/756.html#000001
Well, after searching thru the forums, and a couple more hours in front of the
machine, I believe I may have solved my own problem. Look at me!
I power cycled everything, cleaned and lubed the bobbin area and cutter
assembly.
Finally noticed that the selector arm was not fully retracted. Cleaned and
lubrciated the selector arm assembly.
Put everything back together, seems to be working like a champ.
===========================================================
The AmayaUsers Mailing List
Website: http://www.amayausers.com
Discussion Board: http://www.amayausers.com/boards
Subscribe/Unsubscribe: http://www.amayausers.com/list
===========================================================
Other related posts:
