This message was posted by Digital Stitchz / LaserWorkz on AmayaUsers.com. PLEASE DO NOT REPLY VIA EMAIL. Instead, respond to the thread on the WEBSITE by clicking here: http://www.amayausers.com/boards/cgi-bin/ultimatebb.cgi?/topic/1/906.html#000002 Been there done that! I will clarify, I moved a purchased AMAYA from an apartment in San Diego, CA to Fairfield, CA which is almost 500 miles by a UHAUL van with ramp. First, It's a good idea to remove the thread and anything else that is not screwed or bolted to the AMAYA before moving it. Then, the previous owner and I took it down a flight of stairs and into the van. Being careful to lift it as instructed when an AMAYA is shipped in its original shipping crating. (ie: lift using the metal lifting areas and not the plastic covers.) With the AMAYA off the stand and we roped it carefully on the floor of the van using only the cast metal frame. Drove safely. With normal care of someone who owns the equipment, I had no problems. =========================================================== The AmayaUsers Mailing List Website: http://www.amayausers.com Discussion Board: http://www.amayausers.com/boards Subscribe/Unsubscribe: http://www.amayausers.com/list ===========================================================