This message was posted by Juli in Kona on AmayaUsers.com. PLEASE DO NOT REPLY VIA EMAIL. Instead, respond to the thread on the WEBSITE by clicking here: http://www.amayausers.com/boards/ultimatebb.php?/topic/1/625.html#000003 Update on monitor problem. Changing the screen resolution did not seem to work. Squares still did not show as squares. I have s monitor adjustment (I actually read the instruction book!) called Monitor Ratio. There are only two possible settings 16:9 and 4:3. It was set to 16:9, so I changed it to 4:x3. And My screen resolution is 1280 X 960. This setting shortens my visible screen 2.5" on BOTH sides - so I am only looking at the center portion. But in DS a square is a square. On the program Embird, there is a screen calibration. It shows you a square and it is described by numbers. You take a ruler and actually measure it and enter your new numbers. This then will make a sq show as a sq. Wouldn't it be nice to have this feature on DS. Most of the newe monitors are flat/wide screens now. Right? Juli in Kona =========================================================== The AmayaUsers Mailing List Website: http://www.amayausers.com Discussion Board: http://www.amayausers.com/boards Subscribe/Unsubscribe: http://www.amayausers.com/list ===========================================================