[amayausers] Re: Metallic thread help needed
- From: webmaster@xxxxxxxxxxxxxx
- To: amayausers@xxxxxxxxxxxxx
- Date: Mon, 13 Aug 2007 16:57:38 UT
This message was posted by Image Embroidery on AmayaUsers.com. PLEASE DO NOT
REPLY VIA EMAIL. Instead, respond to the thread on the WEBSITE by clicking
here: http://www.amayausers.com/boards/ultimatebb.php?/topic/2/208.html
I have used metallic thread before with no problems, but for some reason in the
current design I am sewing my metallic thread pops out of the needle at each
trim. :confused:
The design is a simple music note and at each trim the thread pops out of the
needle and I need to re-thread it.I am in no mood to re-thread the needle twice
on all 82 caps! Tie off is a number 3, as suggested by Melco tech to avoid
missed trims.
Specs:
This is a structured cap.
Music notes are .40 tall.
Thank you in advance!
===========================================================
The AmayaUsers Mailing List
Website: http://www.amayausers.com
Discussion Board: http://www.amayausers.com/boards
Subscribe/Unsubscribe: http://www.amayausers.com/list
===========================================================
Other related posts:
