This message was posted by Posh LittleThings on AmayaUsers.com. PLEASE DO NOT REPLY VIA EMAIL. Instead, respond to the thread on the WEBSITE by clicking here: http://www.amayausers.com/boards/cgi-bin/ultimatebb.cgi?/topic/1/1266.html For some reason my machine started acting up. while working on appliques after hitting the green button to continue sometimes it will beep and not start, sometime it jumps "violently" somewhere else and OS is telling me is an X error. I've been solving this issue by turning off the machine and turn it on again without restarting OS, so it starts where it left and no biggie, however I am concerned that something big might happen and of course my warranty expired less than a month ago. It is also making a cracking noise around needle 1,2 and 3 like if the gear wheels are not aligning at that specific spot, help please? Thanks! =========================================================== The AmayaUsers Mailing List Website: http://www.amayausers.com Discussion Board: http://www.amayausers.com/boards Subscribe/Unsubscribe: http://www.amayausers.com/list ===========================================================