[amayausers.com] Re: Machine breaking needles and throwing bobbin
- From: Ronald & Shirley Lowe <rlowe10466@xxxxxxxxxxxxx>
- To: <amayausers@xxxxxxxxxxxxx>
- Date: Thu, 13 Sep 2007 9:22:59 -0500
Did you find the end of the needle that broke. It may have got lodge in the
rotory hook. Take the rotory hook out and look at it closely and also look in
the area where the rotory hook goes. If you find it take it out and clean the
area and put everything back togather. It should be fine. If you have damaged
the rotory hook you will have to get another one. Hope this helps
>
> From: webmaster@xxxxxxxxxxxxxx
> Date: 2007/09/13 Thu AM 08:47:29 EST
> To: amayausers@xxxxxxxxxxxxx
> Subject: [amayausers.com] Re: Machine breaking needles and throwing bobbin
>
> This message was posted by HeatherStitch on AmayaUsers.com. PLEASE DO NOT
> REPLY VIA EMAIL. Instead, respond to the thread on the WEBSITE by clicking
> here: http://www.amayausers.com/boards/ultimatebb.php?/topic/1/188.html
>
> We have been sewing no problem with our machine. Well, last night out of no
> where one of the needles breaks. Then after we replaced it the machine
> started making a strange sound and then bent another needle. At one point it
> even threw the bobbin case out of the machine. Do I try to fix this myself
> or do I request a tech to come fix it????
>
> Heather
> Saraland, Al. :eek: :confused:
>
> ===========================================================
>
> The AmayaUsers Mailing List
> Website: http://www.amayausers.com
> Discussion Board: http://www.amayausers.com/boards
> Subscribe/Unsubscribe: http://www.amayausers.com/list
>
> ===========================================================
>
===========================================================
The AmayaUsers Mailing List
Website: http://www.amayausers.com
Discussion Board: http://www.amayausers.com/boards
Subscribe/Unsubscribe: http://www.amayausers.com/list
===========================================================
Other related posts:
