This message was posted by signman on AmayaUsers.com. PLEASE DO NOT REPLY VIA EMAIL. Instead, respond to the thread on the WEBSITE by clicking here: http://www.amayausers.com/boards/ultimatebb.php?/topic/4/48.html#000003 Our local Aubuchons, hardware store down the street, all the lumber yards-all have a 'hand tool punch' set for grommets-usually 2-3 sizes. Don't bother with the 'plier' type kit-it won't hold up. You want the one with the steel punch and die block-uses a hammer. If you are going to do a lot, buy a 'banner' grommet machine-looks like a bottle capper. I finally bought one last year after 15 years of hand punching and we use it every week. (Banners, not towels). Just load it and pull the handle-fast and sweet.. Or, check with your local 'sign and banner' shop and see if they have one and would let you come in and grommet your towels. I'd let you do it here for about 50¢ a grommet...would save you tons of time and expense of buying your own. =========================================================== The AmayaUsers Mailing List Website: http://www.amayausers.com Discussion Board: http://www.amayausers.com/boards Subscribe/Unsubscribe: http://www.amayausers.com/list ===========================================================