[amayausers] Re: Help with stock design!!
- From: webmaster@xxxxxxxxxxxxxx
- To: amayausers@xxxxxxxxxxxxx
- Date: Sun, 1 Jul 2007 05:26:56 UT
This message was posted by Steve I on AmayaUsers.com. PLEASE DO NOT REPLY VIA
EMAIL. Instead, respond to the thread on the WEBSITE by clicking here:
http://www.amayausers.com/boards/ultimatebb.php?/topic/1/125.html#000001
t,
Open the design and check the density of some of the elements to see if it is
too dense. Try setting columns @ 3.8 if there are fills set them to 3.4. See if
your short stitches box is selected and turn off the auto density and also
check the lock/trim setting to see if it's tying in and off and which tie in is
set. Try setting
===========================================================
The AmayaUsers Mailing List
Website: http://www.amayausers.com
Discussion Board: http://www.amayausers.com/boards
Subscribe/Unsubscribe: http://www.amayausers.com/list
===========================================================
Other related posts:
