If you are connecting through a Ethernet Hub then the crossover cable will not wotk, only if connecting directly from the computer card to the AMAYA. If you are only running one then you probably are not using a hub. Aaron Sargent The Linen Barn linen@xxxxxxxxxxx Medford, OR ----- Original Message ----- From: "frank davis" <fadavis@xxxxxxxxxxxx> To: <amayausers@xxxxxxxxxxxxxxxx>; <jack@xxxxxxxxxxxxxxx> Sent: Sunday, August 03, 2003 5:03 PM Subject: Re: [amayausers] HELP!!! "Ethernet communications did not start correctly" > Jack, > Make sure you're using a crossover cable, the yellow one. The blue > networking cable won't work. As Mike said, Plug & Play should take care of > it. > Frank > Force Ten > ----- Original Message ----- > From: "Jack Peckham" <idyllhounds@xxxxxxxxxxx> > To: <amayausers@xxxxxxxxxxxxxxxx> > Sent: Sunday, August 03, 2003 4:31 PM > Subject: [amayausers] HELP!!! "Ethernet communications did not start > correctly" > > > > Hi, I just recieved my AMAYA friday afternoon. By the time I got it set > up, > > tech support had closed. > > Does anyone know the network protocol? > > Does it run TCP/IP? what IP address. > > It does not show up on my routers DHCP list. > > > > It came with a crossover cable. I tried hooking it up straight into my NIC > & > > got a light, but I get a message "Ethernet communications did not start > > correctly, restart computer" I did & still got the massage. Therefore, I > > hooked up my router with patch cables. Same problem. When I hooked up the > > router, I went into it & looked at the DHCP list, no AMAYA. I thought I > may > > have a NIC card problem, so I put in a card from an old computer & I still > > have the problem, so I am assuming I need to set up something in the > network > > protocols so the AMAYA can be seen??? > > > > HELP!!! > > > > Thanks, > > Jack Peckham > > Greyt Threads > > > > jack@xxxxxxxxxxxxxxx > > web site www.idyllhounds.com > > > > _________________________________________________________________ > > Tired of spam? Get advanced junk mail protection with MSN 8. > > http://join.msn.com/?page=features/junkmail > > > > > > --------------------------------------------------------------------- > > To unsubscribe, e-mail: amayausers-unsubscribe@xxxxxxxxxxxxxxxx > > For additional commands, e-mail: amayausers-help@xxxxxxxxxxxxxxxx > > > > > > > > --------------------------------------------------------------------- > To unsubscribe, e-mail: amayausers-unsubscribe@xxxxxxxxxxxxxxxx > For additional commands, e-mail: amayausers-help@xxxxxxxxxxxxxxxx > --------------------------------------------------------------------- To unsubscribe, e-mail: amayausers-unsubscribe@xxxxxxxxxxxxxxxx For additional commands, e-mail: amayausers-help@xxxxxxxxxxxxxxxx