[amayausers.com] Re: HATS
- From: theboards@xxxxxxxxxxxxxx
- To: amayausers@xxxxxxxxxxxxx
- Date: Fri, 19 Aug 2011 00:05:54 UT
This message was posted by Rod or Sharon on AmayaUsers.com. PLEASE DO NOT REPLY
VIA EMAIL. Instead, respond to the thread on the WEBSITE by clicking here:
http://www.amayausers.com/boards/cgi-bin/ultimatebb.cgi?/topic/1/1219.html#000001
Preppyone,
Yes....look at the toggle clamps closly....you will see that there are two nuts
on the screw. loosen one of these nuts so that you can lengthen the portion of
the screw that sticks out with the pad on it...then tighten the nuts back
up.....not a very good description/explanation, but that is how it is done...
Rod Springer
Amaya Tech & Trainer
===========================================================
The AmayaUsers Mailing List
Website: http://www.amayausers.com
Discussion Board: http://www.amayausers.com/boards
Subscribe/Unsubscribe: http://www.amayausers.com/list
===========================================================
Other related posts:
