[amayausers.com] Re: Fusible no show mesh / wet n stick backings
- From: theboards@xxxxxxxxxxxxxx
- To: amayausers@xxxxxxxxxxxxx
- Date: Fri, 8 Apr 2011 14:21:30 UT
This message was posted by flebow on AmayaUsers.com. PLEASE DO NOT REPLY VIA
EMAIL. Instead, respond to the thread on the WEBSITE by clicking here:
http://www.amayausers.com/boards/cgi-bin/ultimatebb.cgi?/topic/2/1454.html#000005
You are doing what I believe to be carrect by addinmg a layer of tearaway
It gives you better definition
Re the difficulty of the fusible mesh removal - Preheat the edges first and
then peel back and trim
I also agree w using 2 l;ayes of mesh cross patterned for larger stitch counts
12-15,000 or more
We specifically used a low melt -280F on ours so as not to scorch nor shrink
your fabric.
mediumsetting for 10 - 12 seconds
As alwayds - if anyone wants samples pls e-mail me off list
Fred
===========================================================
The AmayaUsers Mailing List
Website: http://www.amayausers.com
Discussion Board: http://www.amayausers.com/boards
Subscribe/Unsubscribe: http://www.amayausers.com/list
===========================================================
Other related posts:
