I should have asked Terri, do you have the new upgrades installed? We have not put our in as yet--maybe there is a correction and I am just not aware as yet. We also have Design Shop Pro+. Sharon Rod Springer Melco Trained Technician/Owner (Design Shop Pro+ Digitizing) Boise, ID (208) 938-3038 springer37@xxxxxxxxxxxx ----- Original Message ----- From: "Lee or Terri Hoover" <lhoover2@xxxxxxxxxxxxxxxx> To: <amayausers@xxxxxxxxxxxxx> Sent: Sunday, January 30, 2005 6:26 PM Subject: [amayausers] Re: Distorted Screen > Ok - you've got my curiosity aroused. We have not noticed any distortion > with our HP zv5160 laptop and Design Shop Pro+. Then again maybe I just see > things distorted always. :) > > Terri Hoover > > -----Original Message----- > From: amayausers-bounce@xxxxxxxxxxxxx > [mailto:amayausers-bounce@xxxxxxxxxxxxx] On Behalf Of Sharon > Sent: Sunday, January 30, 2005 7:27 PM > To: amayausers@xxxxxxxxxxxxx > Subject: [amayausers] Re: Distorted Screen > > Hi Jack, > We purchased the same type of laptop with the wide screen to do tech work > with. We had it with us in Denver for training and they are aware of the > problem. Jeff Banks came to our training room to look at the problem. > Melco is aware of it and I think they were planning to make some changes to > the software at some point. We were hoping it would be included in the 2005 > upgrade but I don't think it was. Jeff, if you are out there, do we have > any answers as yet? You can change your settings for your screen Jack--you > will just have a square screen instead of the wide screen in order to view > things not distorted. We will hope for a fix one day soon. > Sharon > Rod Springer > Melco Trained Technician/Owner > (Design Shop Pro+ Digitizing) > Boise, ID > (208) 938-3038 > springer37@xxxxxxxxxxxx > ----- Original Message ----- > From: "Jack Peckham" <idyllhounds@xxxxxxxxxxx> > To: <amayausers@xxxxxxxxxxxxx> > Sent: Sunday, January 30, 2005 6:02 PM > Subject: [amayausers] Distorted Screen > > > > Hi all, I have purchased a new laptop with a wide screen. when I use > Design > > Shop, the objects are distorted (oval instead of round). Does anyone have > > any sugestions??? > > > > Thanks, > > Jack Peckham > > jack@xxxxxxxxxxxxxxx > > web site www.idyllhounds.com > > > > > > > > >