[amayausers.com] Re: Design shop question
- From: webmaster@xxxxxxxxxxxxxx
- To: amayausers@xxxxxxxxxxxxx
- Date: Thu, 21 Feb 2008 13:37:09 UT
This message was posted by signman on AmayaUsers.com. PLEASE DO NOT REPLY VIA
EMAIL. Instead, respond to the thread on the WEBSITE by clicking here:
http://www.amayausers.com/boards/ultimatebb.php?/topic/3/164.html#000002
In your properties page for design shop lettering, after you type in your text,
look over at the right hand lower corner-Base Line, with a pull down window.
Pull this down, and there are several preset functions. Click on the one you
want, then under that you'll see 'radius', etc., which is where you set your
arc.
Once you click on something and go back to the design page, you can still
modify it on the page, even add additional 'curve' points to make a wave or
rollercoaster effect, etc.
Play with it a little bit-and you can also move individual letters around if
they get a bit out of whack on the curve. Nothing looks worse than improper
letter spacing on a good sewout!
Roland
===========================================================
The AmayaUsers Mailing List
Website: http://www.amayausers.com
Discussion Board: http://www.amayausers.com/boards
Subscribe/Unsubscribe: http://www.amayausers.com/list
===========================================================
Other related posts:
