This message was posted by JuneForever on AmayaUsers.com. PLEASE DO NOT REPLY VIA EMAIL. Instead, respond to the thread on the WEBSITE by clicking here: http://www.amayausers.com/boards/ultimatebb.php?/topic/3/230.html#000003 OK. Let me try to explain more clearly. I have a design on the screen and I simply want to select some part of it. Normally, you just use the select tool, click and hold the mouse button, draw a square around the items I want to select and let the button go. That will then select all the objects that were enclosed by the box. My box will not show up (even though I knwo its drawing it). this same behavir happens when I try to create a complex fill (or anything else). I click point 1 and move to point 2 and a line shoudl be drawing while I am going to point 2, but my line doesn't show up. Its not really a Design problem, more of an interface problem... =========================================================== The AmayaUsers Mailing List Website: http://www.amayausers.com Discussion Board: http://www.amayausers.com/boards Subscribe/Unsubscribe: http://www.amayausers.com/list ===========================================================