[amayausers.com] Re: Colors to machine
- From: DLCompton@xxxxxxx
- To: amayausers@xxxxxxxxxxxxx
- Date: Fri, 19 Sep 2008 12:20:58 EDT
Exit OS, turn your machines off. Go in to your Program Files, Melco
Embroidery Systems, Amaya, Jobs, Cluster #. Delete the files. Open OS, make
sure the
check box is checked for getting the colors from the design. Turn on your
machine. There should be no jobs loaded. Load your design. You should be back
in
business.
Dorothy Compton, Owner
Bee Embroidered
_www.BeeEmbroidered.com_ (http://www.beeembroidered.com/)
(916) 635-7467
Embroidery, Screenprinting, Rhinestones, Vinyl
In a message dated 9/19/2008 6:29:34 A.M. Pacific Daylight Time, e3m@xxxxxxx
writes:
Bill,
I'm not 100% sure of what you are describing. Are you talking about the
software automatically choosing the color sequence for you or are you are you
talking about the colors that you see on the screen in Amaya OS are just not
the correct colors for the design?
This could be related to how you have your settings in software or possibly
due to the format of the design you are sending to the machine.
Ed
-------------- Original message from Griffin William <wag@xxxxxxxxxxxxxxxx>:
--------------
_
When I send the design to the Amaya, it is no longer automatically putting
the right colors on the machine. That is, whatever needles were used in the
previous design, Amaya is leaving those same colors in the new design.
What do I need to do to get it to correctly assign needles again?
Bill
Bill & Trish Griffin
EmbroiderOn
715 First Street
Elizabeth City, NC 27909
252.335.2321
www.EmbroiderOn.com_ (http://www.embroideron.com/)
**************Looking for simple solutions to your real-life financial
challenges? Check out WalletPop for the latest news and information, tips and
calculators. (http://www.walletpop.com/?NCID=emlcntuswall00000001)
Other related posts:
