[amayausers] Re: Clamp System
- From: <springer37@xxxxxxxxxxxx>
- To: amayausers@xxxxxxxxxxxxx
- Date: Sat, 14 Oct 2006 07:32:36 -0700
=0D =0D
Darlene,=0D
The HoopTech and the Slimline sytems are primarily one and the same. I a= m
not sure exactly where Sharon bought ours but we have both the smaller ve=
rsion and the larger jacket back version. i do know that Melco sells them a=
nd has them on their website and in their catalog. Sharon purchased the jac=
ket back version just to do a bunch of Carhart coats with, and found out ve=
ry quickly that it would not work. There is not enough room at the top of t=
he clamp for the excess material regardless if the jacket is right side up =
or upside down and you can;t get a large design low enough to center = it
onthe jacket back.......bummmer!!!! Left chests designs work fine as yo= u
can turn the design sideways and insert the zipper side of the coat in , =
clamp, and sew.=0D
They have worked great on everything else we have tried. On larger items= we
use extra little alligator clamps to help hold the garment in the clamp=
jawsto keep them from slipping.....other than that we have found them to =
bea very useful tool to add to our inventory.....=0D
As mentioned before, taping regular backing to the fast frames or bendin= g
the front edge of the backing as Roland described and then using small al=
ligator or simular low profile clamps, works well in place of the sticky ba=
cking on the fast frames. The more tech work I perform, the more I find mys=
elf shying away from sticky sprays and/or the use of sticky backings .=
MaybeI shouldn't say this but I believe the new XT Amayas do not like&nbs=
p;and or are less compatible to the use of these sticky compounds then the=
older Amayas. The sticky can build up on the knife, thread selector and ro=
tary hook and cause some serious trimming problems. So, I guess my advice i=
s to use them only when absolutely nothing else will work in their place...=
...=0D
Rod Springer=0D
Melco Trained Tech=0D
Boise, Idaho
On Sat Oct 14 12:06 , Darlene Weber <image_maker31@xxxxxxxxx> sent= :
=0D Can someone give me s= ome input as to which clamp system you would
recommend and why??? I have tw= o Amaya XT machines and am looking for a way
of possibly getting away from = using sticky backing when I am doing hard to
hoop items. Has anyone ever fo= und anything that will not work on the clamp
system???
Thanks!
Dave Kohler <dave@xxxxxxxxxxxxxxxx[1]> wrote:
EMS Hooptech makes a line of these, see them at www.hooptechproducts.c=
om[2]. I use them regularly for caps and bags, great device, pricy but wh=
atisn't these days in our field.
Then google for "ICTCS1" or "ICTCS2" to find a likely vendor.
Regards,
Dave
Integrity Embroidery
----- Original Message ----
From: Darlene Weber
To: Amaya
Sent: Friday, October 13, 2006 8:30:39 PM
Subject: [amayausers] Clamp System
I would like to know where I can find out more about this clamp system that=
business owners on this site are talking about in comparison to the fast f=
rames?? If anyone can tell me where to go to find more info, please let me =
know!
Thanks!
---------------------------------
Do you Yahoo!?
Everyone is raving about the all-new Yahoo! Mail.
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
=3D=3D=3D=3D=3D=3D=3D=3D=3D
The AmayaUsers Mailing List
Website: http://www.amayausers.com[3]
Discussion Board: http://www.amayausers.com= /boards[4]
Subscribe/Unsubscribe: http://www.amayausers.= com/list[5]
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
=3D=3D=3D=3D=3D=3D=3D=3D=3D
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
=3D=3D=3D=3D=3D=3D=3D=3D=3D
The AmayaUsers Mailing List
Website: http://www.amayausers.com[6]
Discussion Board: http://www.amayausers.com= /boards[7]
Subscribe/Unsubscribe: http://www.amayausers.= com/list[8]
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
=3D=3D=3D=3D=3D=3D=3D=3D=3D
---------------------------------
Get your email and more, right on the new Yahoo.com
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
=3D=3D=3D=3D=3D=3D=3D=3D=3D
The AmayaUsers Mailing List
Website: http://www.amayausers.com[9]
Discussion Board: http://www.amayausers.com= /boards[10]
Subscribe/Unsubscribe: http://www.amayausers.= com/list[11]
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
=3D=3D=3D=3D=3D=3D=3D=3D=3D
=0D
=
--- Links ---
1 3D"javascript:top.opencompose('dave@xxxxxxxxxxxxxxx=
2 3D"parse.pl?redirec=
3 3D"parse.pl?redirect=3Dhttp%3A%2F%2Fwww.amayausers.com"
4 3D"parse.pl?redirect=3Dhttp%3A%2F%2Fwww.amayauser=
5 3D"parse.pl?redirect=3Dhttp%3A%2F%2Fwww.amay=
6 3D"parse.pl?redirect=3Dhttp%3A%2F%2Fwww.amayausers.com"
7 3D"parse.pl?redirect=3Dhttp%3A%2F%2Fwww.amayauser=
8 3D"parse.pl?redirect=3Dhttp%3A%2F%2Fwww.amay=
9 3D"parse.pl?redirect=3Dhttp%3A%2F%2Fwww.amayausers.com"
10 3D"parse.pl?redirect=3Dhttp%3A%2F%2Fwww.amayauser=
11 3D"parse.pl?redirect=3Dhttp%3A%2F%2Fwww.amay=
===========================================================
The AmayaUsers Mailing List
Website: http://www.amayausers.com
Discussion Board: http://www.amayausers.com/boards
Subscribe/Unsubscribe: http://www.amayausers.com/list
===========================================================
Other related posts:
