This message was posted by Impressive Threads on AmayaUsers.com. PLEASE DO NOT REPLY VIA EMAIL. Instead, respond to the thread on the WEBSITE by clicking here: http://www.amayausers.com/boards/cgi-bin/ultimatebb.cgi?/topic/2/1202.html Ok, I have been sewing out this design off and on for 2 days. It is basically a rectangle (horizontal) fill with a column border. It is going on woven dress shirts, mostly cotton blends. I have tried 3oz, 2oz and 2.5oz cutaway backing. My fill properties are: Fill 4, 3.5 density, stitch angel 85, stitch length 45. I have walk stitches underneath prior to the fill, then edge walk and standard underlay at density 18, angle 45. I am getting tiny little puckets on the top left and bottom right areas of my rectangle. I have tried a different fill (7) and changed my fill stitch angle 90 which were ,y first design options. For large square / rectangle fills what is best for dress shirt type of fabric. Please help I am wasting tons of thread. confused in phoenix Cindy =========================================================== The AmayaUsers Mailing List Website: http://www.amayausers.com Discussion Board: http://www.amayausers.com/boards Subscribe/Unsubscribe: http://www.amayausers.com/list ===========================================================