[amayausers.com] Re: CAP FRAME BILL PROTECTOR
- From: theboards@xxxxxxxxxxxxxx
- To: amayausers@xxxxxxxxxxxxx
- Date: Thu, 25 Aug 2011 13:02:38 UT
This message was posted by gcannon on AmayaUsers.com. PLEASE DO NOT REPLY VIA
EMAIL. Instead, respond to the thread on the WEBSITE by clicking here:
http://www.amayausers.com/boards/cgi-bin/ultimatebb.cgi?/topic/1/1222.html#000001
I just use a double layer of 2" wide painter's tape (the blue stuff) and it
keeps my bills protected. I also try to stay away from needles 1 and 2 & 15
and 16, as this is where the end of the metal strip of the thread trap is sharp
& can do the most damage. Melco needs to round the ends of the strip on the
trap in my opinion.
===========================================================
The AmayaUsers Mailing List
Website: http://www.amayausers.com
Discussion Board: http://www.amayausers.com/boards
Subscribe/Unsubscribe: http://www.amayausers.com/list
===========================================================
Other related posts:
