[amayausers.com] Re: Bobbins to match top threads
- From: theboards@xxxxxxxxxxxxxx
- To: amayausers@xxxxxxxxxxxxx
- Date: Tue, 3 May 2011 13:14:59 UT
This message was posted by Greenwing on AmayaUsers.com. PLEASE DO NOT REPLY VIA
EMAIL. Instead, respond to the thread on the WEBSITE by clicking here:
http://www.amayausers.com/boards/cgi-bin/ultimatebb.cgi?/topic/2/1470.html#000006
??
Regular Ls don't work well
??
The Amaya uses Size L bobbins
There is only one size for L bobbins.
Bernina uses size L most baby lock and brother do also. Some use size 15/A
bobbins which will not fit the Amaya.
Size 15/A are thicker then L
amd There is also a size M bobbin that is the one that fits most quilting
machines they are both thicker and wider then the size L or 15/A.
There are poorly made versions of them all which may cause problems.
But over all any quality size L should be able to work in the Amaya.
You have never used pre-wound plastic bobbins before?
If so you can rewind these empties with the same thread and your good to go.
===========================================================
The AmayaUsers Mailing List
Website: http://www.amayausers.com
Discussion Board: http://www.amayausers.com/boards
Subscribe/Unsubscribe: http://www.amayausers.com/list
===========================================================
Other related posts:
