[amayausers.com] Re: Backing for polyester
- From: theboards@xxxxxxxxxxxxxx
- To: amayausers@xxxxxxxxxxxxx
- Date: Mon, 2 Nov 2009 22:51:53 UT
This message was posted by Sarah at Oneway on AmayaUsers.com. PLEASE DO NOT
REPLY VIA EMAIL. Instead, respond to the thread on the WEBSITE by clicking
here: http://www.amayausers.com/boards/ultimatebb.php?/topic/2/1074.html
I've been asked by our local law enforcement training academy to embroider a
flag for a graduating class. They've brought me a piece of polyester fabric
that they'll sew together after I've done the two sides.
My question is... What backing would be best to use? I think that using
regular cutaway would affect the way the flag drapes too much. Would a double
layer of mesh hold the approx. 40K stitches? I'd float some tearaway under it,
but don't know if the double mesh would be enough.
Help!! Thanks in advance!!
===========================================================
The AmayaUsers Mailing List
Website: http://www.amayausers.com
Discussion Board: http://www.amayausers.com/boards
Subscribe/Unsubscribe: http://www.amayausers.com/list
===========================================================
Other related posts:
