[accesscomp] FW: three tips regarding setting ringtones and vibrating while ringing on the IPhone, Dan's Tip for Monday August 25 2014

From: "Robert Acosta" <boacosta@xxxxxxxxxxx>
To: "tektalk discussion" <tektalkdiscussion@xxxxxxxxxxxxxxxxxxx>
Date: Mon, 25 Aug 2014 07:44:27 -0700

                

 

Robert Acosta, President

Helping Hands for the Blind

(818) 998-0044

www.helpinghands4theblind.org

 

From: dan Thompson [mailto:dthompson5@xxxxxxxxx] 
Sent: Monday, August 25, 2014 5:37 AM
To: dan Thompson
Subject: three tips regarding setting ringtones and vibrating while ringing
on the IPhone, Dan's Tip for Monday August 25 2014

 

Below are three tips regarding ringtones.  The beginning of each is marked
with greater-than sign.

.

> Changing ring tone for a specific contact::

 

 

1.   Hold home button and tell siri to open contacts. 

2.   Locate the contact you wish to edit and tae twice on it.

3.  Move to the top right corner of the  screen and tap twice on "edit."

3.    Swipe from left to right with one finger until reaching "ring tone."

Then tap the screen twice.

4.  Move from bottom left of the screen up the left side and there are
several ring tones.  As you move to one you wish to hear, tap the screen
with  another finger or the double tap with the same finger.  I find it
easier in this case to tap the screen with another finger so I do not lose
my place on the ring tone list.  

5.   Once finding one you like, move to the top right corner of the phone
and locate the "done" button.

Tap twice and the new ring tone is assigned.

6. Move to the top left of the screen and tap twice on "back."

You are now back in all your contacts.  Press the home button to return to
the home screen.

 

> Assigning a ring tone to your default in coming calls: and setting phone
to vibrate and ring at the same time.

I.   Setting the phone to ring and vibrate at the same time.

1.  Hold home button and tell siri to open settings.

2.    Swipe from left to right with one finger until reaching sounds.  Then
tap the screen twice.

3.  Move down from the top left corner of the screen when in portrait
position until reaching "vibrate on ring."

4.  If 
VoiceOver announces it is on, do nothing.  However, if this option is off,
Tap twice on this to turn it on.   You will feel the phone vibrate shortly.

 

 

>II.  Changing default ring tone:

1.       Hold home button and tell siri to open settings.

2.        Swipe from left to right with one finger until reaching sounds.
Then tap the screen twice.

3.        Swipe from left to right until reaching "ring tone" button.
VoiceOver will say "ring tone" followed by the name of the current assigned
ring tone.

4.  Tap twice on the "ring tone button." You could alternatively do the
split tapping which involves leaving one finger on the button and then
tapping anywhere  on the phone with another finger on either hand.

5.  Move from bottom left of the screen up the left side and there are
several ring tones.  As you move to one you wish to hear, tap the screen
with  another finger or the double tap with the same finger.  I find it
easier in this case to tap the screen with another finger so I do not lose
my place on the ring tone list.  

6.  Once finding one you like, move to the top right corner of the phone and
locate the "store" button.

7.  Tap twice and the new ring tone is assigned.

 

8.  If finished, hit the home key.

 

 

 

 

"Prayer is not a check request asking for things from God. It is a deposit
slip - a way of depositing God's character into our bankrupt souls."

-Dutch Sheets,

 

To subscribe to Dan's tips or dedaily devotions, send an email to
dthompson5@xxxxxxxxx with either "subscribe dan's tips" or "subscribe daily
devotion" in the subject.

This message has been scanned by Norton 360

[accesscomp] FW: three tips regarding setting ringtones and vibrating while ringing on the IPhone, Dan's Tip for Monday August 25 2014

Other related posts: