Hi Mo
You can certainly use your guide, that's what I do. My envelope tray
has one which I can adjust according to the length of the item in it.
I don't put the sender's address on it, but I think it can be done. I
think what you would need to do is tab between the two addresses a
couple of times. I must try it and fiddle about to see how many tabs
you would need to press in order to get over the line that runs down
the label separating one address from the other. I have to do all
this by feel because the print is slightly raised on a laser printer,
but I could get someone to look at it just to make sure. If you feel
inclined, give it a bash and see what happens.
Kind Regards,
Jackie Cairns
-----Original Message-----
From: access-uk@xxxxxxxxxxxxx [mailto:access-uk@xxxxxxxxxxxxx] On
Behalf Of Mobeen Iqbal
Sent: 29 August 2012 14:48
To: access-uk@xxxxxxxxxxxxx
Subject: [access-uk] Re: how to print on articles for blind labels
Hi Jackie.
Many thanks for your response. My printer does not have an envelope
tray, though i'm guessing if i put the label where the top left of an
A4 sheet would be when it comes out and move my guide accordingly, it
would work? do you also print the sender's address as well? or does
the label not allow for that?
all the best,
Mo.
On 29/08/2012 14:19, Jackie Cairns wrote:
Hi Mo
I do it all the time. If you have a tray in your printer for
envelopes, simply go into Word, type the address to whom the item is
being sent, and then select that address and centre it. Once you
print it, it should be bang in the middle of the label. I've done
this for years and years without any hassle.
Kind Regards,
Jackie Cairns
-----Original Message-----
From: access-uk@xxxxxxxxxxxxx [mailto:access-uk@xxxxxxxxxxxxx] On
Behalf Of Mobeen Iqbal
Sent: 29 August 2012 14:08
To: access-uk@xxxxxxxxxxxxx
Subject: [access-uk] how to print on articles for blind labels
Hi All.
Has anyone had any success in printing on articles for the blind
labels reliably? are the labels standard measurements, i.e is there a
template available say in microsoft word that'll allow you to print
on a label that size? what i'm wondering is if there's a way i can
print addresses on the labels my self without sighted help.
all the best,
Mo.
** To leave the list, click on the immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** access-uk-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on the
** immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to
** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq
** To leave the list, click on the immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** access-uk-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on the
** immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to
** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq
** To leave the list, click on the immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** access-uk-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on the
** immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to
** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq
** To leave the list, click on the immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** access-uk-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on the
** immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to
** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq
