[access-uk] Re: calling all braille lite users

  • From: "JULIE RODAWAY" <GUIDINGPAWS@xxxxxxxxxxxxxxxx>
  • To: <access-uk@xxxxxxxxxxxxx>
  • Date: Sun, 17 Apr 2011 20:56:28 +0100

Now Alan, if I could hug you, I would.  Thanks a bunch.  Worked perfectly.

Cheers, Julie.
  ----- Original Message ----- 
  From: ALAN THORPE 
  To: access-uk@xxxxxxxxxxxxx 
  Sent: Sunday, April 17, 2011 7:49 PM
  Subject: [access-uk] Re: calling all braille lite users


  hi julie
  try this one then.

  open the file.
  go to the top.
  then t-cord f.follow with z.

  it will ask for print or braille, press p.

  it will ask for a file name.

  go to the vile and see what the extension is, if it is a braille file, press 
st-cord then t, turn off the translator.

  MANY THANKS
  ALAN THORPE
  TEL 0114 220 7007  07961 406 739
  EMAIL  info@xxxxxxxxxxxxx
  WEB www.eyecan.org.uk

    ----- Original Message ----- 
    From: JULIE RODAWAY 
    To: access-uk@xxxxxxxxxxxxx 
    Sent: Friday, April 15, 2011 8:33 PM
    Subject: [access-uk] Re: calling all braille lite users


    Hi Allan

    It didn't work, so can I pick your brains further?

    Many thanks
    Julie.
      ----- Original Message ----- 
      From: ALAN THORPE 
      To: access-uk@xxxxxxxxxxxxx 
      Sent: Thursday, April 14, 2011 3:05 PM
      Subject: [access-uk] Re: calling all braille lite users


      hello Julie

      if I remember correctly, but it can be found under transfer protocols in 
the help menu.

      t-cord, f and then w.
      it should ask you for a file name.

      if this does not work email me off list and I will get my Braille light 
out and give it a go later.

      MANY THANKS
      ALAN THORPE
      TEL 0114 220 7007  07961 406 739
      EMAIL  info@xxxxxxxxxxxxx
      WEB www.eyecan.org.uk

        ----- Original Message ----- 
        From: JULIE RODAWAY 
        To: access-uk@xxxxxxxxxxxxx 
        Sent: Thursday, April 14, 2011 2:53 PM
        Subject: [access-uk] calling all braille lite users


        Hi folks

        I have a grade two file  on the braille lite which I desire to make 
into a text one so I can then transfer onto disk for manipulation my a pc.

        How do I do this?  Its that long since I've needed to do this, I've 
forgotten the steps.

        Any help would be appreciated.
        Best wishes and many thanks
        Julie.  

Other related posts: